na

basaltina: IVORY

Available colours

Available sizes

MAXBST6301
(discontinued)
11.8″ × 23.6″
MATTE
Regular price:
New price : Please contact your sales rep for pricing

Production description

A colour bodied porcelain floor and wall tile with a subtle speckled mottling throughout.

Colour: Ivory

 

Stock quantity may change at anytime.  Please check stock.

Disclaimer

This tile has a blend of colour and texture that is unique to this series. This blend will vary between shipments. No claims allowed after installation. MAY BE USED FOR HEAVY COMMERCIAL. For best results use TEC382G/TEC383W medium bed mortar. Trowel size minimum ½” × ½” × ½”. COLOUR SHADE VARIATIONS The colour shade or shades of all tile varies some degree from piece to piece, from each production run to run. At least several pieces from the same production run should be reviewed whenever possible to determine acceptable colour shade variations. Any questions or concerns about your tile selection should be clarified prior to installation. Centura recommends an installation pattern offsetting the planks at the most of 20 cm. Please note: This tile is rectified which allows for smaller grout joints.

Main Usage

FLOOR

General Usage

FLOOR, WALL, RESIDENTIAL, HEAVY COMMERCIAL

Other information

Price book page: DISCONTINUED

Specifications

Regular price:
N/A
Regular price:
N/A
New price:
Please contact your sales rep for pricing
PC/SF:
0.516
PC/CTN:
8
Shade rating:
V2
PEI rating:
5
Finish:
MATTE
 
 
Actual size:
11.8″ × 23.6″
Nominal size:
12.00″ × 24.00″
(30 cm × 60 cm)
Suggested grout colour(s)
Suggested Schluter accessorie(s)

All ceramics are sold in FULL CARTONS ONLY unless otherwise stated in the Centura London price book

Leed Information available upon request

*The colours represented on this website may vary slightly from the actual product colours.  Please view actual samples prior to making your selection.  Please note that all information is intended as a guideline.  Please ensure that the product you selected is suited for the area(s) they are to be installed in.  Site conditions and installation procedures are the responsibility of the customer.