RONDEC Anodized Aluminum
- TECHNICAL DATA
Available products
Product description
Schluter-RONDEC in anodized aluminum is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Disclaimer
When choosing the accessories for your job it is important to consider all aspects of the installation, from flooring, to sub-floor, to traffic flow and more. Please ensure you are using the appropriate product for the area it is being installed. The colours shown on this website are a representation of the product and the actual colour may vary. Please view all product prior to installation.
Usage
WALL, RESIDENTIAL, COMMERCIAL, WET AND DRY AREAS
Other information
Price book page: Schluter Catalogue p.27-33
Specifications
SCHRO125ACGB : $33.76 Each
Click to enlarge
Product description
Schluter-RONDEC in anodized aluminum is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Disclaimer
When choosing the accessories for your job it is important to consider all aspects of the installation, from flooring, to sub-floor, to traffic flow and more. Please ensure you are using the appropriate product for the area it is being installed. The colours shown on this website are a representation of the product and the actual colour may vary. Please view all product prior to installation.
Usage
WALL, RESIDENTIAL, COMMERCIAL, WET AND DRY AREAS
Other information
Price book page: Schluter Catalogue p.27-33
Specifications
SCHRO125ATGB : $34.51 Each
Click to enlarge
Product description
Schluter-RONDEC in anodized aluminum is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Disclaimer
When choosing the accessories for your job it is important to consider all aspects of the installation, from flooring, to sub-floor, to traffic flow and more. Please ensure you are using the appropriate product for the area it is being installed. The colours shown on this website are a representation of the product and the actual colour may vary. Please view all product prior to installation.
Usage
WALL, RESIDENTIAL, COMMERCIAL, WET AND DRY AREAS
Other information
Price book page: Schluter Catalogue p.27-33
Specifications
SCHRO125TSBG : $52.84 Each
Click to enlarge
Product description
Schluter-RONDEC in anodized aluminum is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Disclaimer
When choosing the accessories for your job it is important to consider all aspects of the installation, from flooring, to sub-floor, to traffic flow and more. Please ensure you are using the appropriate product for the area it is being installed. The colours shown on this website are a representation of the product and the actual colour may vary. Please view all product prior to installation.
Usage
WALL, RESIDENTIAL, COMMERCIAL, WET AND DRY AREAS
Other information
Price book page: Schluter Catalogue p.27-33
Specifications
SCHRO100ACG : $26.54 Each
SCHRO125ACG : $30.93 Each
Click to enlarge
Product description
Schluter-RONDEC in anodized aluminum is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Disclaimer
When choosing the accessories for your job it is important to consider all aspects of the installation, from flooring, to sub-floor, to traffic flow and more. Please ensure you are using the appropriate product for the area it is being installed. The colours shown on this website are a representation of the product and the actual colour may vary. Please view all product prior to installation.
Usage
WALL, RESIDENTIAL, COMMERCIAL, WET AND DRY AREAS
Other information
Price book page: Schluter Catalogue p.27-33
Specifications
SCHRO100AE : $21.88 Each
SCHRO125AE : $25.76 Each
SCHRO60AE : $19.57 Each
Click to enlarge
Product description
Schluter-RONDEC in anodized aluminum is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Disclaimer
When choosing the accessories for your job it is important to consider all aspects of the installation, from flooring, to sub-floor, to traffic flow and more. Please ensure you are using the appropriate product for the area it is being installed. The colours shown on this website are a representation of the product and the actual colour may vary. Please view all product prior to installation.
Usage
WALL, RESIDENTIAL, COMMERCIAL, WET AND DRY AREAS
Other information
non stock special order
Price book page: Schluter Catalogue p.27-33
Specifications
Click to enlarge
Product description
Schluter-RONDEC in anodized aluminum is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Disclaimer
When choosing the accessories for your job it is important to consider all aspects of the installation, from flooring, to sub-floor, to traffic flow and more. Please ensure you are using the appropriate product for the area it is being installed. The colours shown on this website are a representation of the product and the actual colour may vary. Please view all product prior to installation.
Usage
WALL, RESIDENTIAL, COMMERCIAL, WET AND DRY AREAS
Other information
Price book page: Schluter Catalogue p.27-33
Specifications
SCHRO100AT : $24.59 Each
SCHRO125AT : $28.56 Each
Click to enlarge